|
| |
| |
|
 |
|
www.rovanco.com
(815) 741-6700 |
|
|
| A Rovanco Piping System is built around
a pipe that has a need to be insulated or contained. That pipe can be any
one of many materials, including PVC, steel, copper and stainless steel. The
basic insulating material used is urethane foam. When required, mineral
wool, calcium silicate, fiberglass, and foamglass are used to handle
critical, high-temp applications. A wide range of protective jacketing
materials is available, including PVC, polyethylene, steel and aluminum. |
| |
| Rovanco Containment PipeŽ has been developed to
provide a means to contain fluids that may leak out of a primary pipe,
preventing the material from endangering personnel or contaminating the
soil, ground water or air.
 Typical uses of Rovanco
Containment Pipe include oil, natural gas, chemicals, solvents, process
waste, gasoline and acid transfer lines.
Our design and manufacturing experience coupled with a wide selection of
both carrier and jacket materials makes Rovanco the ideal source for
Containment Piping Systems.
Rovanco's marketing surveys have shown that 87% of the fluids and gases
requiring containment can be transported in either the Rovanco PVC
Containment Pipe System or the Rovanco Steel Containment Pipe System. Both
systems are available with the added features of: |
| |
Hi-Temp Conduit comes as a complete, trouble free,
long lasting watertight heat distribution system that is engineered and
factory fabricated to your specifications. Rovanco's Hi-Temp Conduit System
comes with a full compliment of engineering services and support from our
field service representatives, including Cathodic Protection Services. When
you need to transfer high temperature media, consider the following reasons
for specifying Rovanco's Hi-Temp Conduit System.
-
 Hi-Temp
Conduit is specifically designed to distribute steam, condensate, high
temperature hot water, process fluids and fuel oil.
- Hi-Temp Conduit conforms to the Class A Concept and is designed to be
fully drainable, dryable and air testable.
- Rovanco Hi-Temp Conduit is engineered to withstand hostile soil and
water environments with a fusion bonded epoxy coating on the steel casing.
Rovanco also offers "Rhinocoat", which is an extremely durable and tough
epoxy outer coating that provides additional mechanical protection for the
piping system.
- Rovanco's Hi-Temp Conduit is designed for a long life. It is pre
manufactured at our plant to assure uniformed quality and to eliminate
costly field fabrication.
- Hi-Temp conserves energy with a design that minimizes thermal loss and
keeps the insulation dry, maintaining its thermal efficiency.
- Hi-Temp Conduit comes in a wide range of carrier pipe sizes 1/2"
through 36". It can be manufactured in configurations to adapt to
virtually any application.
|
| |
| Pre-Insulated Urethane Foam has
revolutionized the industry with high-performance systems capable of
carrying liquids at controlled temperatures ranging from -350° F to +250° F,
and with a K factor less than half that of ordinary insulation.
 Rovanco's
Insul-8 pre-insulated piping is manufactured at its Joliet, Illinois plant
to provide simple field installation. It has been specified for many diverse
projects requiring both a wide range of carrier pipe and protective jacket
materials.
Common to each of Rovanco's Piping System, is an exacting process through
which urethane foam uniformly fills the space between the carrier pipe and
jacket. |
| |
|
 Rhinoflex
pre-insulated PEX and Polyethylene comes
in the longest lengths available from any supplier of flexible pre-insulated
piping.
Rhinoflex can be
pulled through road sleeves up to 1,000 ft or directionally bored under
roadways, walkways, driveways, streams and ponds! If installed with pipe
weights, it can be laid directly in a pond, lake, river or stream!
Rhinoflex can easily
be cut to length with just a hacksaw. No special tools or equipment
are required to install. Rovanco provides complete installation kits,
accessory materials, installation instructions. No special training or
skills are required.
|
|
|
| |
|
