|
Commercial:
Intelli-Fin:
At 97% thermal efficiency, Intelli-Fin is the industry’s only water
heater or boiler utilizing LonWorks technology for integration into building
management systems via an open network. A digital display on the front of
the boiler allows access to 21+ different data points including mode of
operation and total run time. Remote monitoring and control access are also
available through phone lines. Units are full modulation and available
in sizes of 1500, 1700 or 2000 MBH input.
Power-Fin Extended Series:
The new Power-Fin extended series models offer all the features of the
original Power-Fin line, plus the SMART SYSTEM digital temperature control,
fully modulating (your choice of 2:1 or 5:1 turndown) , and more flexible venting – up to 50
feet. Best of all, the SMART SYSTEM has a built-in lead/lag control
sequencer capable of controlling up to 8 boilers. Models are offered in three
sizes: 1500, 1700 and 2000 MBH input. Each are capable of up to 87%
thermal efficiency.
Power-Fin:
The Power-Fin, Lochinvar's flagship water heater, set a standard
in the commercial water heater market in 1986 that has yet to be broken.
Its industry-changing design heats water more efficiently, saving the
end-user money. Plus, the Power-Fin is easy to install and easy to
service. It's small enough to fit in just under 6 square feet of floor
space, and its 0" clearance on all sides allows you to add as many units
as you need for unlimited capacity and expandability. Units are
offered with either an on/off or full
modulating control (4:1 turndown) system. Models range from 500 to 1300 MBH input and provide up to 87% thermal efficiency.
Power-Fin Package System:
Each package system can be custom configured to the exact
specifications and available space of each job. These Power-Fin package
systems are pre-engineered, pre-piped, pre-tested and shipped
pre-assembled on "I-Beam" skids ready for installation.
Copper-Fin II:
The Copper-Fin II Water Heater line provides a number of uncommon
benefits to the commercial water heater market. For instance, every
major component has a back-up, so down-time is virtually eliminated.
Smaller vent sizes are standard, keeping material and installation costs
down. And revolutionary proportional firing allows the Copper-Fin II to
perform at peak levels even at lower inputs for uncommon efficiency
levels, and uncommon savings.
Copper-Fin II Package System:
Pre-engineered and pre-assembled to precisely meet your specific
application, Copper-Fin II Package Systems come complete with all piping
mounted on I-beam skids, pressure-tested and ready for hook-up. Select
from multiple arrangements for storage and recovery to create a
Copper-Fin II Package System that exactly matches your application.
Copper-Fin:
The Copper-Fin Water Heater delivers quality performance to the
commercial water heater market at a competitive price. And it offers
several Built-In-Advantages that competitive models don't. Its compact
design saves valuable space in the mechanical room - and getting it
there is easy, because most models fit through a standard 36" doorway.
Its gasketless design makes it more reliable than competitive models,
and it is flexible enough to be matched with any size storage tank,
creating a package system to meet any need.
Copper-Fin Package System:
Pre-engineered and pre-assembled to precisely meet your specific
application, Copper-Fin Package Systems come complete with all piping
mounted on I-beam skids, pressure-tested and ready for hook-up. Select
from multiple arrangements for storage and recovery to create a
Copper-Fin Package System that exactly matches your application.
Custom Hi-Power Electric:
Custom Hi-Power electric water heaters offer energy saving
performance in horizontal and vertical configurations. With capacities
of 150 to 2500 gallons and inputs of 12 to 432 kW, this water heater can
be customized to fit any application.
Light Commercial:
Armor:
The Armor is a fully modulating, condensing, high efficiency
water heater. It
is an installer's dream: lightweight and compact, with key components that
are easy to access. The Armor offers PVC venting versatility, rugged
reliability, five models with inputs ranging from 150,000 to 500,000 Btu/hr,
and up to 98% thermal efficiency. It also comes with the SMART SYSTEM control, which
includes a service indicator, contractor-accessible password protection, and
a 2-line display with simple fault descriptions, not codes. Best of
all, the SMART SYSTEM has a built-in lead/lag control sequencer
capable of controlling up to 8 units.
Better Idea:
Lochinvar's "Better Idea" is an indirect fired water heating
system. Specifically, it's our Copper-Fin line of models ranging from
90,000 to 500,000 Btu/Hr. Designed to outperform traditional "tank-type"
water heaters, our "Better Idea" systems heat more water for less money,
have an average life-span of over twice the traditional tank-type's
life-span, are easier to service in the field, and allow you to match
the demand to the system by choosing the size storage tank best fits
your needs.
Copper-Pak:
The Copper-Pak stacks the benefits of our Copper-Fin line right
on top of the efficient delivery system and low stand-by loss of our
Lock-Temp storage tank. The result is an efficient, longer lasting,
lighter weight, competitively priced, indirect-fired water heating
system that is easy to service and fits in the space required by a
traditional tank-type water heater.
Efficiency+:
The Efficiency+ light commercial water heater is an easy business
decision for small business owners. It saves money day after day, keeps
performing for years after traditional water heaters have to be
replaced, and provides conveniences such as the ability to re-start
itself if there is a power failure. All of this in an incredibly small
package.
Efficiency Pac:
The Efficiency Pac stacks all of the convenience and reliability
of our Efficiency+ water heater right on top of the efficient delivery
system and low stand-by loss of our Lock-Temp storage tank to produce an
extremely efficient water heating system for small business owners. The
Efficiency Pac provides all of the benefits of an indirect fired system,
such as cost-efficient fuel savings and longer life-cycle, yet fits in
the same space as a traditional tank-type water heater.
Charger:
The Lochinvar Charger is designed to provide years of
trouble-free service in commercial and industrial applications. Every
unit we make is 100% fire-tested at a working condition in our factory
before we ship it out, so that we know - and you know - that its quality
is second to none. We build it to last longer, fit in spaces others
won't, and lend itself to ease of service and installation. In a crowded
world full of "me-too" tank-type water heaters, the Charger stands
alone.
Super Charger:
The Lochinvar Super Charger incorporates all
of the high-efficiency performance and design benefits of the Charger
with the addition of an integrated fan-assisted combustion system. The
result is optimum combustion with fan-assisted movement of the flue
products over the multi-flue tank surface for improved heat transfer
from the flue gases to the water. The Super Charger power-assist fan
allows installation with conventional negative draft venting using
standard type “B” vent material. The ultimate in tank type water
heating!
Turbo Charger:
The
Lochinvar Turbo Charger features a fully condensing, sealed combustion,
direct vent design, which draws all combustion air from outside and
vents all byproducts outdoors. The flexible venting options include
vertical or horizontal venting with ABS, CPVC or PVC pipe, up to 100
equivalent feet with 3″ vent pipe and 150 equivalent feet with 4″ vent
pipe.
The submerged combustion chamber, premix power burner and unique triple
pass flue system create a heater with a thermal efficiency rating of up
to 98 percent. The premix power burner precisely mixes gas and air for
optimum efficiency while producing low NOx emissions that meet all air
quality standards.
Charger DV:
The Charger DV is a powered direct-vent gas water heater
specifically designed to draw all intake air from outside the room and
exhaust all by-products of combustion to the outside through one single
vent opening. Ideal for applications where combustion intake air is at a
premium, such as restaurants and commercial kitchens.
Standard Hi-Power Electric:
Standard Hi-Power Electric water heaters are ideal for
applications requiring light to medium draw capacities. With no venting
requirements, these commercial electric units provide installation
flexibility.
Compact ASME Hi-Power Electric:
Compact ASME certified electric water heaters
EX Special Light Duty Electric:
The EX Special Electric Water Heater is available in tank
capacities of 30 to 120 gallons, in both tall and short models. The EX
Special is appropriate for applications requiring moderate quantities of
hot water such as small offices and retail stores.
Explosion-Resistant Electric Water Heaters:
Explosion-Resistant Electric Water Heaters are available in
Junior, Tall and Short models with capacities of 6 to 120 gallons. This
heater is perfect for applications that require an extra measure of
safety and dependability in a hostile environment.
Electric Booster:
Space Saver Boosters are compact, 100% efficient, and provide the
most economical means for raising rinse water temperatures to the
required 180 degrees F.
Residential:
Residential Gas Conventional:
Lochinvar Residential Water Heaters are designed to be more
convenient than the typical residential water heater. Depending on your
needs, you can choose a short or tall model in electric, LP gas, Natural
Gas, or Oil. Or choose our Double-Duty line and combine domestic hot
water and space heating needs in one unit. And if you choose natural gas
on any of the above models, you can choose from multiple venting
options. Convenience is just one of the many advantages that come built
in with our residential water heaters.
Residential Gas Power-Vented:
Lochinvar Residential Water Heaters are designed to be more
convenient than the typical residential water heater. Depending on your
needs, you can choose a short or tall model in electric, LP gas, Natural
Gas, or Oil. Or choose our Double-Duty line and combine domestic hot
water and space heating needs in one unit. And if you choose natural gas
on any of the above models, you can choose from multiple venting
options. Convenience is just one of the many advantages that come built
in with our residential water heaters.
Residential Gas Balanced Flue:
Lochinvar Residential Water Heaters are designed to be more
convenient than the typical residential water heater. Depending on your
needs, you can choose a short or tall model in electric, LP gas, Natural
Gas, or Oil. Or choose our Double-Duty line and combine domestic hot
water and space heating needs in one unit. And if you choose natural gas
on any of the above models, you can choose from multiple venting
options. Convenience is just one of the many advantages that come built
in with our residential water heaters.
Manufactured Home Residential Gas:
Utilizes sealed combustion type (direct venting) where all
combustion air is supplied from outside through the air intake.
Available in 30 and 40 gallon capacities with a BTU/hr input of 30,000,
this heater now has a low NOx burner.
Double Duty Residential Gas Atmospheric and Direct Vent:
Domestic water and Space Heating all in one. The Double Duty heats water
for domestic use and maintains a comfortable space temperature via
hydronic or radiant heating.
Residential Electric Water Heaters:
Available in tall, short and table top models with capacities of
30 to 120 gallons, these water heaters are available with 6 or 10 year
warranties.
Junior Electric Water Heaters:
The Junior Electric and Mighty-2 Water Heaters are available in 5
models ranging in capacity from 2 to 30 gallons. These compact water
heaters are perfect for small offices, bathrooms, wash stations, and
applications requiring very little hot water
Residential Oil-Fired Water Heaters:
Lochinvar® Residential Oil-Fired Water Heaters are perfect for
residential and light commercial applications. With the latest in high
efficiency, these heaters are available in 3 models of 30, 50 and 70
gallons with BTU/hr inputs of 90,000 to 140,000.
|